February 4, 2009
——— Releasing the ø133 mm × 91 mm Centrifugal Fan
SANYO DENKI CO., LTD. has developed the ø133 mm × 91 mm centrifugal fan “San Ace C133”. This product has achieved industry's top large air flow and high static pressure, energy-saving and low noise.
The centrifugal fan blows air in a centrifugal course.
It is suitable for high system impedance machine, such as communications equipments, servers, storages and heat exchanges.
They have the PWM speed control function for external fan rotation speed control.
The fan features the industry’s top large air flow and high static pressure
in its size.
･Maximum air flow : 6.39 m3/min
･Maximum static pressure : 395 Pa
The fan features the industry’s top energy-saving in its size.
to energy saving and the running cost reduction of devices.
･Power consumption: 26.4 W
The fan features the industry’s top low noise in its size.
It contributes to the low noise design of devices.
･Sound Pressure Level: 61dB(A)
|Air flow||6.39 m3/min (225 CFM)|
|Static Pressure||395 Pa (1.59 inch H2O)|
|Power Consumption||26.4 W|
|Rated Speed||4,150 min-1|
|Sound Pressure Level||61 dB(A)|
|Size||ø133mm x 91mm|
|Operating Voltage||DC 36 V to 72 V|
|Rated Voltage||DC 48V|
|Life Expectancy||40,000 hours
(L10: Survival rate: 90% at 60℃, rated voltage, and continuously run in a free air state)
When our inlet nozzle (Option) is mounted.
Inlet nozzle: Nozzle mounted in fan inlet side to adjust the flow of introduced air
These products are specifically designed for use in communications equipment, servers,
storages and heat exchanges and other applications.
*The installation example is an attached sheet
February 4, 2009
Initial fiscal year: 5,000 units per month
Second fiscal year: 10,000 units per month
The information in this release is current as of February 4, 2009.
“ San Ace ” is a trademark of SANYO DENKI Co.,LTD.
Close this page